Loctite® 233841 Super Glass Glue, Crystal Clear & Dishwasher Safe, 2-G

Loctite® Glass Glue is the only patented super glue specially formulated for bonding glass; Glass to Glass, Glass to Metal, Stained Glass, Crystal, & Tinted Glass. Forming fast and durable joints, the bond is water and heat resistant to stand up to every day use. Loctite Glass Glue dries clear, sets without clamping and is dishwasher safe.

• Size: 2 gram
• Color when dry: Crystal Clear
• Dries clear and colorless
• Invisible repairs
• Sets in seconds
• No clamping required
• Water & heat resistant to stand up to every day use
• Specially formulated for bonding glass
• Form fast & durable joints
• Works on clear, tinted, brown, opaque & stained glass & crystal
• Dishwasher safe
• Self-piercing tube
• Easy to use.

Recommended For:

• Works on clear, tinted, brown, opaque and stained glass and crystal
• Bonding all types of glass to itself and glass to non-porous materials such as metal and certain plastics

Not Recommended For:

• Bonding glass to Styrofoam, foam rubber, pure bone china, polyethylene, polypropylene and PTFE
• Gap filling applications (parts must be close mating with no gaps or voids)
• Assemblies which will be exposed to temperatures over 176°F (80°C)
• Use as a general purpose adhesive
• Use in oven or microwave.

Directions:

Safety Precautions:

• Well-ventilated area, gloves.

Preparation:

• Surfaces must be clean, dry and free from oil, wax and paint. Wash all glassware with water and dry. Avoid using detergents to clean glassware as detergent residues can affect the quality of the bond. Protect work area. Pre-fit parts to be joined. All parts to be bonded must be close fitting with no gaps or voids. Screw the cap and nozzle down clockwise all the way to tube shoulder, puncturing the tube. Remove the cap counter clockwise from the nozzle.

Application:

• Apply Loctite Instant Glass Glue sparingly to one material to be bonded. Use approximately one drop per square inch of surface. Press surfaces together immediately. Hold in place for 5 to 60 seconds until bond sets. Do not reposition parts. Leave parts undisturbed for at least 1 hour or for best results leave overnight for full bond strength to develop. Wait 1 week before washing item in dishwasher. Clean nozzle tip with tissue and replace the cap.

Cleanup:

• Cured adhesive may be cut away with caution using a sharp blade, removed with Duro Super Glue Remover, mineral spirits or with boiling water.