J-B® Weld 50112 ClearWeld™ Quick Setting Epoxy Adhesive Syringe, 25 ml
Description
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld™ sets to a hard, permanent bond.
- Size: 25 ml
- Quick setting 5 minute
- Sets in 5 minutes
- Cures in 1 hour
- Strength is at 3200 PSI
- Multi purpose use: tile, ceramic, glass, wood, most plastics & more
- Features no mess, no waste cap
- Made in the USA.
Use On:
- Automotive
- Brick
- Ceramic
- Cloth/Carpet
- Concrete
- Epoxy & Adhesives
- Fiberglass
- Glass
- Plastic/Composite/PVC
- And More
Instructions:
- Prepare: Clean surface area of dirt, grease, oil, paint or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
- Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
- Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
- Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time is longer.