Valspar 82092C Natural Look Waterproofer, 18.9 Litres
Valspar 82092C Natural Look Waterproofer, 18.9 Litres
$113.28
SKU: 12243777
MFG: 82092C
Description
Valspar Natural Look Waterproofer forms a long lasting, waterproofing seal on concrete, brick, masonry, natural stone, and pavers. This penetrating formula protects against the sun's powerful rays, damaging weather, water, petrol, and de-icing salts.
- Size: 18.9 Litre
- Flash Point: 250 deg F
- Application Temperature – 50-90 °F
- Clear waterproofing sealer for driveways, sidewalks, pavers, and patios
- Protects from sun, water, and household-chemical damage
- Resists petrol, oil, and de-icing salts
- Durable protection while maintaining the beauty of concrete
- Does not change the natural appearance of the surface.
Where To Use
- Exterior aggregate, concrete, brick, pavers, masonry, mortar and flagstone. Do not use on garage floors.
Preparing Your Surfaces
- General: All surfaces must be clean, dry, and free of all loose, peeling paint, or contaminants. Bare concrete: Allow 60 days minimum for new concrete to cure before sealing. Previously sealed surfaces: Clean with an all-purpose cleaner (TSP or substitute). Previously sealed surfaces must be porous and able to accept additional sealer. Test surface porosity before sealing: Avoid using this product on nonporous, sealed surfaces. To test, place a few drops of water on the surface. If water sinks in, the surface is porous enough to use this finish. If water remains on the surface, do not use.
Specifications
MFR:
82092C
SKU:
12243777
UPC:
042397705755
Brand:
Valspar
Length:
12
Width:
12
Height:
15
