Cabot® 0837-07 Solid Color Acrylic Siding Stain, Cordovan Brown, 1 Gal

It is an advanced-technology, 100% acrylic solid color stain formulated to have superior performance properties for the professional user. It is a heavily pigmented and exceptionally thick wood siding stain, delivering greater opacity than conventional solid color stains. The result is smoother spread, better coverage and superb handling when applied by either brush or sprayer. In addition, this product has been developed and tested for use in colder temperatures, extending the exterior maintenance season for professionals in cooler climates.

It covers previously painted or stained surfaces in just one coat, improving project completion time and maximizing labor efficiencies. This stain is so advanced it does not require the use of a primer coat on non-extractive-prone wood species such as pine, white cedar or cypress.

• 1 gallon
• Cordovan brown
• VOC
• Solid color acrylic siding stain
• Maximum pigment for superior coverage & uv protection
• It is a heavily pigmented and exceptionally thick stain
• Covers previously painted or stained surfaces in just 1 coat.

Coverage:

• On smooth surfaces covers approximately 300-400 square feet per gallon (7.4-9.8 square meters per liter) and on rough surfaces, 200-300 square feet per gallon (4.9-7.4 square meters per liter). These rates will vary depending upon the porosity of the surface.

Where to Use:

• This versatile, fade-resistant and water-repellent exterior stain provides superior results when applied on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding.

Preparing Your Surfaces:

• Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or the wood must be exposed to dry weather for a minimum of 3 to 5 days.) Previously painted, stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residues and other foreign matter. Use Cabot Problem-Solver Wood Brightener to easily remove tannin bleed, nail and metal rust stains, and renew the wood's appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than 4 weeks. The use of Cabot's Problem-Solver Primer and Cabot's Problem-Solver Primer eliminates the need to weather new wood and retards extractive bleeding in wood species such as red cedar, fir and redwood.

Application:

• Stir Cabot's Solid Color Acrylic Siding Stain thoroughly before and occasionally during use. Intermix containers of the same color. Apply two coats to new wood for maximum protection. Apply with a high-quality polyester brush, roller or spray. When spraying, always backbrush for optimal results. Maintain a wet edge to avoid lap marks. Restain every 6-8 years for best appearance.