Minwax® 671004444 Teak Oil Superior Protection for Dense Woods, 1-Qt

Protects dense woods and enhances wood grain by penetrating into wood pores, restoring the wood's natural warmth and richness. Teak oil is recommended for outdoor and indoor furniture, and on marine surfaces above the water line. Use minwax teak oil periodically to refresh your dense woods and help protect them from moisture and uv rays.

• 1 Quart
• Application tool: brush or cloth
• Protects dense woods from moisture & uv rays
• Enhances wood grain by penetrating into wood pores
• Dry time: 6-8 hours
• Cleanup: mineral spirits or paint thinner according to manufacturer’s safety recommendations
• Coverage: 125-150 sft. per quart
• Coats: 1-2
• Recommended uses: indoor and outdoor furniture and wood surfaces above the water line.

FAQ:

What surfaces is minwax teak oil recommended for?

Minwax teak oil is great for indoor and outdoor furniture made from hardwoods and on marine wood surfaces above the waterline.

Can i apply minwax teak oil to wood floors or outdoor decks?

No. Minwax teak oil is not recommended for wood floors or outdoor decks.  Minwax teak oil protects dense woods from moisture and uv rays by penetrating into the wood pores.  Minwax teak oil does not create a protective film on wood surfaces such as minwax fast-drying polyurethane which is recommended for wood floors.  For outdoor decks try thompson's water seal.

Does minwaxteak oil contain uv inhibitors?

Minwax teak oil does contain uv protection to delay the sun from graying the wood over time.

How do i apply minwax teak oil?

Minwax teak oil can be applied with a clean cloth or a brush.  Apply minwax teak oil to bare wood or to wood that is free of old finishes, then wipe off any excess moving in the direction of the wood’s grain.

Should minwax teak oil be applied repeatedly?

Yes. Minwax teak oil should be reapplied whenever the wood appears to be dry or worn out in order to restore the effectiveness of the finish.

Can i apply a topcoat over minwax teak oil?

Yes, a topcoat such as minwax helmsman spar urethane can be applied over minwax teak oil. Although we recommend that minwax teak oil be reapplied to dry, worn out wood, a topcoat such as minwax helmsman spar urethane will offer additional protection. Wait a minimum of 72 hours after applying minwax teak oil before applying additional topcoats.